Technical characteristics of the Dover panel UNI EN 13200-3

Description

To UNI EN 13200-3 standard

Fencing consisting of rigid rectangular mesh panels, rectangular-section tubular posts and fixing accessories.

Welded mesh panels with 50×200 mm mesh, 6 mm vertical wire and double 8 mm horizontal wire for greater rigidity. Steel galvanised to UNI EN 10244-2 standard and coated with thermosetting polyester powder. Including 30 mm blunt tips on one side only. Green RAL 6005 colour available from stock; other colours on request. Available in the two heights specified by the standard (see technical data sheet).

Rectangular tubular uprights 60x140x3 mm. Steel galvanised to UNI EN 10244-2 standard and coated with thermosetting polyester powder. Double horizontal square tubular sections measuring 50×50×1.5 mm, fixed to the posts with through-bolts and anti-theft nuts.
Hot-dip galvanised iron connectors, coated with thermosetting powder in the same colour as the posts, fixed with self-drilling screws.
The Dover fencing system, compliant with the UNI EN 13200-3 standard, is installed on the ground using purpose-made plinths sized by a chartered engineer, following geological inspection. They may be installed on a concrete base wall in appropriately sized holes with purpose-made plates and anchors with mandatory minimum dimensions of 200x200x25 mm. The posts are manufactured to specification. All three installation types respect the post centre spacing of approximately 2533 mm.

What they are saying about us